EZ Stain FAQs

EZ Stain is a pigment-based concrete stain made for adding long-lasting color to concrete and other porous, unsealed surfaces. It is designed for a natural look, strong bonding, fade resistance and better durability than common dye-based stains.

EZ Stain can be used indoors or outdoors on new or existing concrete surfaces and overlays. Common projects include patios, driveways, walkways, pool decks, walls, artificial rock, water features, stamped concrete and other porous, unsealed substrates.

Yes. New concrete should be fully cured before staining and sealing. As a general rule, wait at least 28 days before applying EZ Stain to new concrete.

Yes. For weathered, stained or older concrete, use a more opaque color approach to bring the surface back to a cleaner, more uniform concrete look. This is especially useful for patios, driveways, walkways and outdoor living areas.

Yes. EZ Stain colors can be mixed with other EZ Stain colors to create custom looks. Always test your mix first in an inconspicuous area before applying it to the full project.

EZ Stain is ready-to-use. Use it full strength for a richer natural look, dilute with water for a lighter washed look, or add coats for deeper color and more opacity.

Clean the surface completely before application. Remove oil, grease, gum, wax, dust, dirt and any foreign material. Heavy-duty cleaner or degreaser may be needed for tougher stains, and efflorescence or mineral deposits should be removed before staining.

If the surface is not structurally solid, repair or replace it before applying stain.

A pump sprayer is the most common application method. Cone tips sprayed in a circular motion typically work better than fan tips. For faux or multi-colored looks, you can also dab with a sponge or brush.

• Shake well before use and during application.
• Pour through a paint filter to help avoid clogs.
• Airless sprayers or HVLP guns may also be used.

Apply EZ Stain when the surface temperature is between 50°F and 100°F. On hot days, apply early in the day. You can lightly mist the surface with water to cool it down before application.

Do not apply if rain is expected within 24 hours, and turn off sprinklers before and after application.

Yes. Always test in an inconspicuous area first. Concrete porosity, age, repairs, previous coatings and application method can affect the final color and appearance.

When the color looks flat, the stain has dried and additional colors or coats can be applied. After the final stain coat, allow an additional 1-3 hours of cure time before sealing.

Yes. For best results, protect EZ Stain with two or more coats of a film-forming professional-grade sealer, such as a compatible Glaze 'N Seal sealer. Sealer helps protect the color and finished surface.

Yes. EZ Stain can be used on horizontal and vertical surfaces, including patios, driveways, walkways, walls, overlays, artificial rock and water features.

One gallon of EZ Stain typically covers about 200-400 sq. ft., depending on the condition and porosity of the concrete. Diluting with water for a lighter wash can increase coverage up to approximately 600-700 sq. ft.

It depends on the look you want. One coat gives a more natural transparent look. Additional coats increase color depth and opacity. For repairs, stained areas or color variation, Base Coat may help create a more uniform starting point.

EZ Stain Base Coat is used to prime and prep concrete before applying stain. It helps cover repairs, blend mismatched concrete, conceal rust bleed and create a more opaque, uniform surface before adding color.

Use Base Coat when concrete has repairs, worn areas, bad staining, rust staining, patchy color or high porosity. It helps even out the surface so the final EZ Stain color looks more consistent.

Yes. Base Coat can be custom tinted with any Glaze 'N Seal EZ Stain color. It can also be diluted with water when feathering or blending repairs.

Base Coat coverage is approximately 200-400 sq. ft. per gallon, depending on the condition and porosity of the concrete. Diluting for lighter blending can increase coverage.

The Safety Data Sheet covers EZ Stain colors including Limestone Yellow, Desert Gold, Terra Cotta, Brick Red, Cafe, Antique Black, Medium Grey, Titanium White, Base Coat, Fiesta Green, Emerald Green and Cobalt Blue.

For the latest SDS sheets and technical documents, visit the Technical Information page or contact support.

EZ Stain is listed as Zero VOC and the SDS notes that it is not regulated by U.S. DOT shipping regulations and is not considered dangerous goods by IATA or IMO. Always follow the current label and SDS for handling instructions.

Wear eye protection and gloves during use. Use adequate ventilation, and use an approved respirator when spraying indoors or when ventilation is limited. Wash hands thoroughly after handling.

Clean tools and small messes with soap and water before the product dries. Store product away from freezing conditions and high heat, and keep it out of reach of children.

Yes. Orders over $99 qualify for free shipping.

EZ Stain currently ships within the United States. Shipping options and availability are shown at checkout.

Once your order ships, tracking information will be sent to the email address used at checkout. Check your spam or promotions folder if you do not see the email.

Returns are accepted within 30 days of delivery. Items should be unused, unopened and in original condition. To start a return, contact support with your order number.

Opened, used, mixed or custom-tinted product may not be eligible for return. Contact support with your order details and photos if there is an issue with your shipment.

Contact support as soon as possible with your order number and photos of the box, label and product. This helps the team resolve damaged, missing or incorrect shipments faster.

Yes. For larger residential, commercial or contractor projects, contact support with your project size, surface type and goal so the team can help point you toward the right products and quantities.